#define USB_CFG_CLOCK_KHZ (F_CPU/1000) #define USB_CFG_VENDOR_ID 0xc0, 0x16 /* USB vendor ID for the device, low byte first. If you have registered your * own Vendor ID, define it here. Otherwise you use obdev's free shared * VID/PID pair. Be sure to read USBID-License.txt for rules! * This template uses obdev's shared VID/PID pair for HIDs: 0x16c0/0x5df. * Use this VID/PID pair ONLY if you understand the implications! */ #define USB_CFG_DEVICE_ID 0xdf, 0x05 /* This is the ID of the product, low byte first. It is interpreted in the * scope of the vendor ID. If you have registered your own VID with usb.org * or if you have licensed a PID from somebody else, define it here. Otherwise * you use obdev's free shared VID/PID pair. Be sure to read the rules in * USBID-License.txt! * This template uses obdev's shared VID/PID pair for HIDs: 0x16c0/0x5df. * Use this VID/PID pair ONLY if you understand the implications! */ #define USB_CFG_DEVICE_VERSION 0x00, 0x01 /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'k', 'r', 'e', 'u', 'z', 'h', 'o', 'l', 'z', 'e', 'n', '.', 'd', 'e' #define USB_CFG_VENDOR_NAME_LEN 14 /* These two values define the vendor name returned by the USB device. The name * must be given as a list of characters under single quotes. The characters * are interpreted as Unicode (UTF-16) entities. * If you don't want a vendor name string, undefine these macros. * ALWAYS define a vendor name containing your Internet domain name if you use * obdev's free shared VID/PID pair. See the file USBID-License.txt for * details. */ #define USB_CFG_DEVICE_NAME 'D', 'C', 'F', '7', '7', '-', 'C', 'l', 'o', 'c', 'k' #define USB_CFG_DEVICE_NAME_LEN 11 #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. */ #define USB_CFG_INTERFACE_CLASS 3 /* HID */ #define USB_CFG_INTERFACE_SUBCLASS 0 #define USB_CFG_INTERFACE_PROTOCOL 0 /* See USB specification if you want to conform to an existing device class or * protocol. * This template defines a HID class device. If you implement a vendor class * device, set USB_CFG_INTERFACE_CLASS to 0 and USB_CFG_DEVICE_CLASS to 0xff. */ #define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 22 /* total length of report descriptor */ /* Define this to the length of the HID report descriptor, if you implement * an HID device. Otherwise don't define it or define it to 0. * Since this template defines a HID device, it must also specify a HID * report descriptor length. You must add a PROGMEM character array named * "usbHidReportDescriptor" to your code which contains the report descriptor. * Don't forget to keep the array and this define in sync! */ /* #define USB_PUBLIC static */ /* Use the define above if you #include usbdrv.c instead of linking against it. * This technique saves a couple of bytes in flash memory. */ /* ------------------- Fine Control over USB Descriptors ------------------- */ /* If you don't want to use the driver's default USB descriptors, you can * provide our own. These can be provided as (1) fixed length static data in * flash memory, (2) fixed length static data in RAM or (3) dynamically at * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more * information about this function. * Descriptor handling is configured through the descriptor's properties. If * no properties are defined or if they are 0, the default descriptor is used. * Possible properties are: * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched * at runtime via usbFunctionDescriptor(). * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found * in static memory is in RAM, not in flash memory. * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), * the driver must know the descriptor's length. The descriptor itself is * found at the address of a well known identifier (see below). * List of static descriptor names (must be declared PROGMEM if in flash): * char usbDescriptorDevice[]; * char usbDescriptorConfiguration[]; * char usbDescriptorHidReport[]; * char usbDescriptorString0[]; * int usbDescriptorStringVendor[]; * int usbDescriptorStringDevice[]; * int usbDescriptorStringSerialNumber[]; * Other descriptors can't be provided statically, they must be provided * dynamically at runtime. * * Descriptor properties are or-ed or added together, e.g.: * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) * * The following descriptors are defined: * USB_CFG_DESCR_PROPS_DEVICE * USB_CFG_DESCR_PROPS_CONFIGURATION * USB_CFG_DESCR_PROPS_STRINGS * USB_CFG_DESCR_PROPS_STRING_0 * USB_CFG_DESCR_PROPS_STRING_VENDOR * USB_CFG_DESCR_PROPS_STRING_PRODUCT * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER * USB_CFG_DESCR_PROPS_HID * USB_CFG_DESCR_PROPS_HID_REPORT * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) * */ #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION 0 #define USB_CFG_DESCR_PROPS_STRINGS 0 #define USB_CFG_DESCR_PROPS_STRING_0 0 #define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 #define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 #define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 #define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT 0 #define USB_CFG_DESCR_PROPS_UNKNOWN 0 /* ----------------------- Optional MCU Description ------------------------ */ /* The following configurations have working defaults in usbdrv.h. You * usually don't need to set them explicitly. Only if you want to run * the driver on a device which is not yet supported or with a compiler * which is not fully supported (such as IAR C) or if you use a differnt * interrupt than INT0, you may have to define some of these. */ /* #define USB_INTR_CFG MCUCR */ /* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ /* #define USB_INTR_CFG_CLR 0 */ /* #define USB_INTR_ENABLE GIMSK */ /* #define USB_INTR_ENABLE_BIT INT0 */ /* #define USB_INTR_PENDING GIFR */ /* #define USB_INTR_PENDING_BIT INTF0 */ /* #define USB_INTR_VECTOR SIG_INTERRUPT0 */ /* the entries below are generated from the menuconfig settings */ #define USB_CFG_IOPORTNAME D #define USB_CFG_DMINUS_BIT 4 #define USB_CFG_DPLUS_BIT 2 #define USB_CFG_INTR_POLL_INTERVAL 254 #define USB_CFG_HAVE_INTRIN_ENDPOINT 1 #define USB_CFG_SUPPRESS_INTR_CODE 1 #define USB_CFG_HAVE_INTRIN_ENDPOINT3 0 #define USB_CFG_EP3_NUMBER #define USB_CFG_IMPLEMENT_HALT 0 #define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_MAX_BUS_POWER 60 #define USB_CFG_IMPLEMENT_FN_WRITE 0 #define USB_CFG_IMPLEMENT_FN_READ 0 #define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 #define USB_CFG_HAVE_FLOWCONTROL 0 #define USB_CFG_SERIAL_NUMBER '0','0','-','0','1' #define USB_CFG_SERIAL_NUMBER_LEN 5